Company NewsCurrent location ：Home > Company News
- Date：2024/7/29 Posted：Xinxiang Goldenfilter Technology Co., Ltd.
- Nano dust removal filter cartridges are widely used in industries such as cutting and welding dust, shot blasting cleaning machines, dust collectors, and other dust removal equipment. With the development of technology and the continuous use of new materials. The daily maintenance of the nano dust removal filter cartridge requires the following:
1. Maintenance of the dust removal filter cartridge filtration system room and filter cartridge.
Whether it is a bag filter or a nano dust filter cartridge, it is necessary to immediately remove the dust adhering to the surface of the dust filter cartridge during operation to ensure the actual effectiveness of the filtration system of the dust filter cartridge.
2. Inspection of electric/manual electric air valves for nano dust removal filter cartridges.
The inspection of the dust removal filter cartridge electric air valve can be determined based on its daily operating conditions. The manual electric air valve can be judged based on whether the manual control switch is damaged to determine whether it needs maintenance. When the electric air valve is not working, it is necessary to check whether the electricity is connected properly. If the electric air valve is clearly intact, check whether the relay is damaged. If it is damaged, the dust removal filter cartridge relay should be replaced immediately.
3. Inspection of electronic control unit components for dust removal filter cartridge.
The dust removal filter cartridge needs to be regularly inspected and maintained during the gap time to ensure its complete performance. The inspection of complete components such as relays can be carried out by replacing them with electronic components.
4. Sealing inspection of nano dust removal filter cartridge.
When there are small water droplets or rust like water mist inside the outer shell of the dust removal filter cartridge, it should be considered that it is caused by water mist or leakage from the outside. If there is a problem with water mist, it should be considered that the main reason for the condensation of hot exhaust gas is due to the low working temperature of the dust removal filter cartridge.
Email